Harley-Davidson® 1,600 KM Service



TASK KEY
  • I - Inspect, and if necessary correct, clean or replace.
  • L - Lubricate with specified lubricant.
  • R - Replace or change.
  • T - Tighten to proper torque
  • A - Adjust.
  • X - Perform.
  • D - Disassemble (lube and inspect).

AT 1,000 MILES / 1,600 KILOMETERS
SERVICE OPERATION
  • R - Change engine oil and filter.
  • I - Inspect air cleaner, service as required.
  • RI - Change primary chaincase lube and clean drain plug.
  • I - Check and adjust rear belt.
  • A - Adjust primary chain.
  • I - Clutch adjustment.
  • R - Change transmission lubricant and clean drain plug.
  • I - Inspect brake pad linings and discs for wear.
  • I - Check brake fluid reservoir levels and condition.
  • I - Inspect oil lines and brake system for leaks.
  • IL - Lubricate front brake hand lever, throttle control cables, clutchcontrol cables (and hand lever), and rear brake pedal bushing (if applicable).
  • L - Lubricate jiffy stand.
STEERING HEAD BEARINGS
  • A - Dyna models
  • A - FLT models
  • A - Softail models
  • A - Sportster models
  • AL - Springer models
  • I - Check, adjust operation of enrichener, throttle control.
  • I - Inspect fuel valve, lines and fittings for leaks.
  • I - Check operation of all electrical equipment & switches.
  • I - Check cruise control disengage switch & components.
  • I - Check battery and clean connections.
  • I - Change spark plugs.
  • I - Check tire pressure and inspect tread.
  • X - Adjust springer rocker bearings.
  • I - Check air suspension - pressure, operation & leakage.
  • Check stabilizer links and engine mounts.
  • T - Check tightness of all critical fasteners: hand controls, brake system, axle nuts, front fork components, riser and handle barfasteners.
  • L - Lubricate hinges, latches - fuel door, tour-pak, saddlebags.
  • I - Check engine idle speed.
  • X - Road test.